BIBC is a highly integrated hydraulic electronic brake system (One-Box) developed by BIBO on a full stack basis. 1) Highly integrated: EBS+ABS+ESC+EPB+ADAS; 2) High computing power: 4-core MCU, hardware embedded; 3) High security: ISO 26262, ISO 21448, ISO/SAE 21434 ; 4) Convenient layout: Flexible matching of vehicle installation; 5) Strong performance: TTL ≤ 150ms, with a 30% improvement in braking performance; 6) Strong application: Meet the application of platform based vehicle models; 7) Strong expansion: Support customized development of customer functions, support OTA; 8) Low cost: The cost of single car wire controlled braking is reduced by 30%; 9) It can be combined with the brake redundancy module BRBM to form an integrated line control dynamic redundancy system.

BESC can integrate EPB function, indirect tire pressure iTPMS, and support ADAS functions such as AEB and ACC. 1) High performance: excellent status recognition module, complete fault diagnosis and degradation protection; 2) Low cost: integrated yaw angle sensor, EPB, and indirect tire pressure system; 3) Strong expansion: Strong universality, can match different models below 3.5t； 4) Self research capability: Full stack self research, capable of deep collaborative development with customers; 5) Redundancy scheme: Implement brake redundancy control through the Two-Box scheme; 6) Functional safety: Meet ASIL D functional safety level design.

Developed on the same platform as BIBC, BEBS 2.0 can achieve a fully decoupled hydraulic solution to meet customers' high-quality pedal feel needs. 1) Better mechanical structure: hollow motor+ball screw direct drive, transmission efficiency ≥ 95%; 2) Fully decoupled electro-hydraulic braking: The pedal sensation is independent of the basic braking, and fully decoupled braking control; 3) Stronger compatibility: Built in manual and servo cylinders, with larger capacity and more compatible models on the same platform; 4) Higher braking backup capability: failure deceleration ≥ 0.5g@500N ; 5) Better pedal feel quality: fully hydraulic simulated pedal feel, supporting customer customization; 6) Better braking performance: stronger pressure building capacity (≥ 18Mpa), TTL ≤ 150ms.

BEBS (BIBO eBooster) is a semi decoupled eBooster with stronger pressure building ability and adjustable high-quality decoupled pedal feel, which can achieve 100% braking energy recovery. 1) Multiple series and specifications: manual and automatic driving versions can be matched with 22.22/23.81/25.4 series master cylinders; 2) Strong pressure building ability: response speed ≤ 170ms@10Mpa The maximum pressure building capacity is ≥ 16Mpa; 3) Pressure precise control: pressure control accuracy ≤ 0.1Mpa; 4) Rich functions: BBF, EBR, CRBS, PRL, AVH, VLC, etc; 5) Widely used: passenger cars, light passenger cars, light trucks, pickup trucks, unmanned vehicles, special vehicles, etc; 6) Adjustable pedal sensation: Multiple pedal sensations can be freely switched.